How to make a multi-dec butterfly decal with rhinestones and vinyl
Materials
Tutorial
Step 1
Download the .SVG design, open it with your software design. Peel out the backing of your magic flock material stick it on the cutting mat. Load and cut.
Cut Settings
Step 2
Take out your magic flock from the cutting mat.
Step 4
Weed out all the vinyl you have cut.
Step 5
Brush rhinestones on the magic flock template.
Step 6
Use Hot-Fix transfer tape to transfer the rhinestones.
Step 7
Place the first vinyl layer on top of the shiny side of the HTV anything and cover both of them over and under with cover sheets.
Step 8
Set your temperature to 300 °F - 310 °F and press for 3 seconds.
Step 9
Peel off the carrier sheet.
Step 10
Line up your design and press each color layer of the Glitter HTV. Set temperature to 320 °F and press 3 secs for each of the color. Remember to add cover sheets over and under each press.
Step 11
Set the temperature to 325 °F and press your rhinestone transfer for 5-10 secs until they stick on the glitter. Peel off the hot-fix tape. Remember to add cover sheets over and under before press.
Step 12
Repeat step 9 for the last rhinestone transfer layer, press with a full 15 secs. You can turn the decal over and press it again to ensure the glue will stick better. Remove the hot-fix tape and you are done.









