Posted by TRW on 4/15/2021 to Product Guides and Cut Settings
Adhesive VinylBlade DepthForceSpeedPasses
Glow Adhesive Vinyl
420101
EasyWeed Adhesive (for foil)115101
Heat Transfer VinylBlade DepthForceSpeedPasses
Brick 600 HTV730101
Glow in the Dark HTV218101
EasyWeed HTV115101
Electric HTV120101
Glitter HTV617101
Holographic HTV717101
Metal HTV717101
Stretch HTV31551
StripFlock HTV416101
Twinkle HTV315102
EasyPatterns310101
EasyPuff3681

Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

Adhesive VinylCricut ExploreCricut Maker
Glow Adhesive Vinyl
Light Cardstock +287
EasyWeed Adhesive (for foil)Vinyl +176
Heat Transfer VinylCricut ExploreCricut Maker
Brick 600 HTVCardstock299
Glow in the Dark HTVIron on +
203
EasyWeed HTVIron on185
Electric HTVIron on185
Glitter HTVIron on +203
Holographic HTVIron on +203
Metal HTVIron on185
Stretch HTVIron on +203
StripFlock HTVCustom: Flockpaper 249249
Twinkle HTVLight Cardstock+287
EasyPatternsIron on +
203
EasyPuffVinyl+Iron On

Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

graphtec CE6000
Heat Transfer VinylBladeSingle Cut
(Force)		Double Cut
(Force)		Speed
Brick 600 HTV60°x26-2830-50
EasyWeed HTV45°9-11x50-60
Glitter HTV60°x12-1450-60
Holographic HTV60°x12-1450-60
StripFlock HTV60°15x30-50

Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

Speed Settings
For most cuts, speed will be around 60. As you create designs that are smaller and more intricate (under 5”), speed should be decreased to 30. If you notice the blade dragging or “picking at” your vinyl with small  designs, decrease speed further.


Graphtec CE6000-40
- 14.76” Maximum Cutting Width
- Servo Motor Technology
- Up to 300 grams of cutting force
- Up to 24 ips (inches per second)
- LCD Screen
- 8 User Settings
- Comes with Graphtec Studio and Cutting Master 3 Software
- ARMS System (Automatic Registration Mark Sensor)
- 1 Year Warranty (2 Year Warranty if registered within 30 days)

Graphtec CE6000-60
- 23.7” Maximum Cutting Width
- Comes with Stand
-Servo Motor Technology
- Up to 300 grams of cutting force
- Up to 35 ips (inches per second)
- LCD Screen
- 8 User Settings
- Comes with Graphtec Studio and Cutting Master 3 Software
- ARMS System (Automatic Registration Mark Sensor)
- 1 Year Warranty (2 Year Warranty if registered within 30 days)

GCC Expert 2-2lx
Heat Transfer VinylBladeSingle Cut
(Pressure)		Double Cut
(Pressure)		Speed
Brick 600 HTV65°x120-14050-60
EasyWeed HTV45°60-7040-6060
Glitter HTV65°x60-7060
Holographic HTV65°x90-11060
StripFlock HTV65°90-110x60
Siser Reflect All65°
x70-9060

Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

Speed Settings
For most cuts, speed will be around 60. As you create designs that are smaller and more intricate (under 5”), speed should be decreased to 30. If you notice the blade dragging or “picking at” your vinyl with small  designs, decrease speed further.


GCC Expert 2
- 23.2” Cutting Width
- Stepper Motor
- Up to 400mm/sec cutting speed
- Comes with Great Cut 3 Software
- Up to 250 grams of cutting force
- 90 Day Warranty (After Registration)

GCC Expert 2LX
- 23.2” Cutting Width
- Stepper Motor
- Comes with Great Cut 3 Software
- Up to 250 grams of cutting force
- Up to 400mm/sec cutting speed
- AAS II Optic Lens for Contour Cutting (Automatic-Aligning System)
- 90 Day Warranty (After Registration)

GCC Jaguar
Heat Transfer VinylBladeSingle Cut
(Pressure)		Double Cut
(Pressure)		Speed
Brick 600 HTV65°x100-12060
EasyWeed HTV45°60-7040-6060
Glitter HTV65°90-11070-9060
Holographic HTV65°90-11070-9060
StripFlock HTV65°90-110x60

GCC Jaguar IV
- 24” Cutting Width
- DC Servo Motor Technology
- Digital Screen
- Comes with Great Cut 3 Software
- Up to 1530mm/sec cutting speed
- Up to 600 grams of cutting force
- 1 Year Warranty
- AAS II Optic Lens for Contour Cutting
(Automatic-Aligning System) 


puma III
Heat Transfer VinylBladeSingle Cut
(Pressure)		Double Cut
(Pressure)		Speed
Brick 600 HTV65°x120-14060
EasyWeed HTV45°60-70x60
Glitter HTV65°90-11070-9060
Holographic HTV65°90-11070-9060
StripFlock HTV65°90-110x60

GCC Puma III
- 23.2” Cutting Width
- DC Servo Motor Technology
- Digital Screen
- Comes with Great Cut 3 Software
- Up to 600mm/sec cutting speed
- Up to 400 grams of cutting force
- 1 Year Warranty
- AAS II Optic Lens for Contour Cutting
(Automatic-Aligning System)


Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

Speed Settings
For most cuts, speed will be around 60. As you create designs that are smaller and more intricate (under 5”), speed should be decreased to 30. If you notice the blade dragging or “picking at” your vinyl with small  designs, decrease speed further.

roland
Heat Transfer VinylBladePressureSpeedDouble Cut
Brick 600 HTV65°120-14025Yes
EasyWeed HTV45°100-11025No
Glitter HTV65°100-12025Yes
Holographic HTV65°100-12025Yes
StripFlock HTV65°90-11025
No

Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter.

Speed Settings
For most cuts, speed will be around 25. As you create designs that are smaller and more intricate (under 5”), speed should be decreased gradually. If you notice the blade dragging or “picking at” your vinyl with small designs, decrease speed further.

Roland GS-24
- 22.9” Maximum Cutting Width
- Digital Servo Motor Technology
- 8 User Settings
- LCD Screen
- Comes with Cut Studio Software
- Up to 20 ips (inches per second)
- Up to 250 grams of cutting force
- Built-In Optical Registration System
- 2 Year Warranty