Cutting Strip for GCC/Roland Cutters

Question

Q: This came with my cutter but no instructions on what to do with it. I'm hoping you can tell me what it's for since I bought the cutter from you. Thanks for any help you can offer.

Asked by: Levern Mcfadden - 4/8/2023

Submit an answer

Q: Have you changed cutting strips? I received a gray very narrow strip that will not fill the cut strip area on my GCC expert 24. let me know if I have the wrong product.

Asked by: Dana Hinman - 9/25/2022

Submit an answer

Q: Will this fit my Roland gx24 cutter

Asked by: Andrae - 11/4/2023

Submit an answer

Q: when will these be back in stock?

Asked by: Holly Tolbert - 8/17/2021

Submit an answer

Q: Is this item currently in stock?

Asked by: Brian Smith - 5/25/2022

Submit an answer

Q: What is the actual size of this strip Height & length?

Asked by: Dana Hinman - 3/13/2024

Submit an answer

Questions about this item? Ask here.

TRW Pilar (4/8/2023) · Accepted Answer

That would be your backup cutting strip. A cut strip is already installed on your cutter, but these can get cuts and gouges in them with use. The cut strips have an adhesive on the back to hold them in place. To replace your cut strip, we simply use a pick tool to get under one end of the strip and lift it off. Sometimes, you can rotate that strip 180 degrees so that the gouges are to the back of the vinyl cutter and you'll have a nice, smooth cut area that aligns under the cutting blade. (The adhesive side remains pointing down, to hold the cut strip in place).

When you have cut marks on the strip both front and back, remove the old one, peel the paper protective backing on the backup strip and align it to the same channel or space the old strip had been.

If you go to our YouTube channel, search GCC and you'll see the tutorials we have using the GCC cutters. This link takes you to setting up your cutter and all components included with your purchase: https://youtu.be/PyJXEFZHfM8

TRW Pilar (9/26/2022) · Accepted Answer

A: These are the same cutting strips we've had in stock for quite awhile. The replacement cut strip does not need to fill the entire area, but be centered in the cut area.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: TRW Pilar (9/26/2022)

TRW Pilar (11/6/2023) · Accepted Answer

A: This cutting strip fits all GCC and Roland Vinyl Cutters we carry up to 24" Wide.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: TRW Pilar (11/6/2023)

Alex (8/17/2021) · Accepted Answer

A: They are currently backordered, we do not have an ETA as to when we will be receiving more.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Alex (8/17/2021)

Brianna Fitzgerald (5/25/2022) · Accepted Answer

A: Yes it is!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Brianna Fitzgerald (5/25/2022)

TRW Crew (3/14/2024) · Accepted Answer

A: The cut strip is about 24" long and you can flip the strip 180 degrees once you get cut lines in it, to extend the life of your cut strip.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: TRW Crew (3/14/2024)