A: I apologize some of our older designs do not have the stone counts listed! This American Flag Fade Out has 125 Blue rhinestones, 445 Crystal rhinestones and 436 of the Red rhinestones. To do multicolor rhinestone designs, it is easiest to cut a separate template for each color (or each stone size as some designs will have both smaller ss06 and larger ss10 rhinestones in a design.) If you are wanting to save on template material, it is possible to cut the entire design from one piece of Magic Flock, then use extra scraps of flock material to 'block off' the other color areas while sweeping specific colors into their holes. This method is both time consuming and daunting, which is why we recommend to cut a separate template for each color. We do create the templates so they are the same size--this is one purpose, so you can stack the templates. After brushing in your first color, anchor your Acrylic Hotfix tape to one side, pick up the first part of your design with your tape and peel the tape back, again anchoring it to the side. Align the next template directly on top of the first and brush in your second color of rhinestones. Keeping the far edge of your Hotfix tape anchored to the side, pick up the second color of rhinestones. Repeat this process for each color of rhinestone in your design. You may find it easier to brush in as well as lift the design if you don't stack more than 2 templates at a time. If you have more than 2 colors, simply replace the 2nd template with the next and repeat the brushing in method, followed by picking up the design with your Hotfix Acrylic tape, which should still have it's far edge anchored. We have many tutorials showing the entire process. I will find one to link for you. Thanks!