Q: How did you make the foam template for the mask?
A: We ordered Craft foam sheets from our Amazon "Products We Love" and cut them according to the size mask is being used. The size will vary based upon the masks that you purchase.
Q: Can this be cut on the circut joy?
A: This design with the template rectangle/weed box is 4.7" tall. We see the Joy has a max cutting width of 4.5". You Could size the rhinestones to fit your ss10 hotfix rhinestones at .135" and send only the rhinestone portion to your cutter. The extra .5" will be the extra width on your rhinestone template.
The rhinestones only portion (without the yellow template box) measures 6.505" by 4.217".
To hide the yellow template box and to size the rhinestones to size in Design Space, unlock your design and Weld. Go to your Contour button in the lower left side of Design Space. Click Contour and then click Hide All. This hides all dots and the template box of your design. Click on ONE dot of the design and hit the X to close out of the Contour panel. One dot should be on your workmat. Go to the top Design Space toolbar and resize that dot to .135" and hit Enter. Go back to your Contour panel and click Show All. You can click the template box from the Contour panel to temporarily hide it from your Joy. Close the Contour panel, select your design and send to your Joy by hitting Make it,
Q: Can I adjust the template to fit different masks?
A: These templates were created specifically for the masks we have linked under the Products we Love. There are dozens, if not hundreds of masks on the market now and each will have different seams, measurements, etc.
Rhinestone designs are 'set in stone', so to speak. Unlike svg designs created for vinyl, a rhinestone design cannot be stretched or shrunk as the most important part of a rhinestone template is cutting the holes to fit the specific rhinestones you are using.
Q: What did you use or can i use to brush the rhinestones in the template?
A: We are always happy to let you know if you can pick up something locally to save some money—this is the Shurline paint edger, available at many Lowe’s or WalMart stores.
However, if you can’t source it locally, we do carry them on our website under Rhinestones then Hotfix Supplies. This is our Monster Rhinestone brush.
Q: I have bought all your materials even the same mask in the description and when I cut out the flock template to 4.7 wide and 7.0 it is to big for the mask. what can I do to fit my mask?
A: Thank you for bringing this to our attention. While the masks are from the same manufacturer and supplier, the Amazon masks MAY be from different batches and may not fit the template perfectly.
We recommend using Acrylic Hotfix tape to block off some of the outer rings of the mask template, so when you brush in rhinestones, your rhinestone transfer will be smaller.
Q: I ordered the masks from Amazon and they are too small. In the photo is shows that the link to the mask is in the description but I do not see it. I would like to get the exact masks you use from the same place you get yours from so I can be sure that they will be the correct size. I really do not want to use the hack to cover up some of the wholes on the magic flock template. Any help you can give me would be greatly appreciated~~
On the webites home page, scroll down a touch until you see a template saying, Products We Love.
Scroll down a little ways and you'll find a few mask options.
Q: How can I open these CDR files in Silhouette Designer Edition Plus software?
A: First after download, go to the download location of the file. Unzip it / Export to an easy to find location. From Silhouette now you'll be able to open the files since they're not compressed anymore.
Q: How do I use or covert these files for use in Cricut Design space?
A: No converting needed! Just unzip the files and use the one marked Crafter File. We've already knocked out the circles so it will be DS friendly.