Q: What is the cut setting for Magic Flock on the Cricut Maker?
A: On the Cricut Maker I stick the Magic Flock template material directly to the cutting mat without the white carrier on the back.
I then have a custom setting with the Cricut Maker in Design Space with a cut force of 350 | 1 Pass | Fine Point Blade
Q: Which setting should I use to cut Magic Flock with a Cricut Explorer Air 2?
A: For a Cricut Explore Air 2 always do a test cut first. Be sure to peel the white backing off of the Magic Flock to place it directly to your cutting mat (fuzzy side Up). Bonded Fabric or Cardstock + has worked great for us. Always Remember that the life of your blade can impact your cut settings.
Q: What is the cut setting for Magic Flock on the Cricut Maker?
A: For best results when using Magic Flock template material in a Cricut Maker. I suggest a custom setting with a cut force of 350 | 1 Pass | Fine Point Blade.
Q: What cute settings should I use on the Silhouette cameo?
A: Start with our recommended cut specs and do test cuts. Life of blade and your particular machine's calibration can impact your cuts. For the Cameo 3 and 4, we recommend Blade depth 6, Speed 10, Force 30 and double cut. We have an interactive catalog for recommended cut settings which can be found here: https://www.therhinestoneworld.com/cut-settings?fbclid=IwAR25y_ZhuItjStFq-ERiwFEb8tbc_HJqM6t_K8t9eKHrLD1epHtV6tQrmVQ
Q: Can this be cut using a cricut
A: Yes, our Magic Flock template material can be cut using a Cricut. We recommend doing test cuts as the life of your blade and specific machine can impact your cuts. We have had the most success peeling the Magic Flock off the backing and placing directly to the cutting mat, then using the Bonded Fabric or Cardstock+ setting (again, depends on the life of your blade). We also recommend using our Roland|GCC|Cricut Cutter Blades, as they are higher quality than the Cricut blades. We use the 45 degree blade for our Magic Flock.
Q: Is there a video how to use this. Can it be used
On any shirts.
A: This material is only intended to be used as a template for rhinestones, the rhinestones are what is actually applied to a shirt. Here is a video explaining how the process works.
Q: Can you change the free font. It's been the same for several months
A: Thank you for your question. We do regularly swap out the free font included with the purchase of a roll of Magic Flock. We just swapped the font included to 5763 A. The font pictured will also be updated shortly. Thanks, again!
Q: I order this product couple weeks ago and I didn't received my tree font
A: If you go to your My Account page, please click the My Orders link near the upper left side. You’ll see a list of every order you’ve made. On the order where you purchased a Magic Flock roll, click the Details link and you should see the free font listed out. You can click the Download link to download your free font.
Q: Can the free font be changed to another font. I have purchased Magic Flock roll several times and need to purchase more and would love a different free font.
A: Thank you for your question! We do regularly swap out the free Rhinestone font included with the purchase of a roll of Magic Flock. We just swapped out the font to TRW 5763 A :) The thumbnail will be updated shortly. Thank you!
Q: Can you make any design off Cricut and use any font then just cut the flock to your own design
A: It's nearly impossible to create a rhinestone design using Cricut's software. However, we have thousands of rhinestone designs and rhinestone fonts that you can cut with your Cricut.
The most important part of a rhinestone design is making certain that the holes in your template are properly sized for a rhinestone to fit in as well as spaced from the other rhinestones far enough so that you do not rip your Magic Flock template material. We have videos showing how to size an uploaded rhinestone design in Design Space using the Contour button.
When cutting a template with a Cricut, we recommend creating a Custom Cut Setting of 350 pressure, single cut, fine point blade.
I need this product... how buy in México
A: We ship worldwide. Order this item and the shipping options will show up when you check out.
To download the bonus font, go to your My Account page, then click My Orders. There you will see the list of order numbers and dates of your purchases. Click the order number and you’ll be taken to the download page.
Q: Greetings. If I want to make a rhinestone tshirt, what supplies do I need? I only want one color.
A: To decorate Tshirts with rhinestones, the list of supplies are:
Magic Flock template material. This is what you Cut The Rhinestone Design in to.
Hotfix Rhinestones - most designs use ss10 Rhinestones and Crystal is the most commonly used color.
Rhinestone brush - we carry these but you may be able to find the Shureline paint edger locally at Lowe’s or Walmart.
Hotfix Acrylic Tape - to lift the rhinestone design from the template and align to your T-shirt. This is heat resistant to withstand the temperature needed to apply Rhinestones.
*The following items are not necessary but very useful:
Rhinestone tweezers - to correct any stragglers or pull any excess or flipped Rhinestones off of your Hotfix Acrylic Tape.
Crystal Katana - great tool to use to add Rhinestones to missed holes in your template.
We have Rhinestone T-shirt kits available, if you’d like to sample making rhinestone shirts before buying all the materials individually. Depending on the number of shirts you’d like to decorate and the designs you’d want to use, one of these kits may be more cost effective.
Q: hello. so once i buy the magic flock +free font . will i be able to download the font to use it as long as it's on to my circut exp. 2. and how will i download it
A: Yes you are allowed to use the font as long as you would like, after purchasing the magic flock roll the font is downloadable from your order.
Q: Will this material work on brother scan n cut Dx125.
A: We do not work with the Brother scan n cut series, but as long as it can cut thicker materials it should be able to be cut. Please keep in mind you will need to make multiple passes over the design to get it to cut.
Q: Hi, question about cutting the majic flock. When you want to do a full design, how do you know what stone size to cut, how do you know what to tell tour machine (cricut) what to do? Is there a YouTube where you explain?
A: The process will vary depending on the type of design you are working with, check out these videos.
Q: do i get to pick the color of stones with the 5yrd roll
A: unfortunately not, the current promo only includes crystal stones.
Q: Just wanted to double check that there was not a bday discount on this item. Going to order and if there is can you just let me know. I know it already has a great price but I just thought I would double check.
A: No the Magic Flock rolls are not discounted, but we are including some rhinestones with each roll.
Thank you so much, I received my orders. Am so delighted but am having a problem using the magic flock. Each time am peeling it after cutting, using the cricut maker, it tears off on some parts , I have tried it 3 times now am afraid am wasting the material. Please help. Thanks. I use design space and the Cricut Maker machine.
A: Please reach out to our support team using the info in the link below.
Q: Can I have the magic flock shipped overnight, for tomorrow's delivery?
A: Overnight shipping is not available in all areas, but unfortunately due to currier delays we are not guaranteeing delivery times right now.
Q: It has been awhile since I did rhinestones. Please remind me which blade to use on the Magic Flock with my Graphtec.
A: You would use the 60 degree blade with the Graphtec.
Q: Can the Magic Flock's be used to make other things?
A: Magic Flock is designed as a rhinestone template material, while it has adhesive on the back of it, it would not be good at being a decal.
Q: Do you ship to United Kingdom how much would it cost I'm interested in the magic flock but wanted to know how much extra I would have to pay on top of my item
A: Yes we do ship to the UK but shipping rates will vary depending on your exact location. To get an accurate shipping quote please add the item to your cart and when prompted to, fill out your shipping information for our system to generate a quote for you.
Q: My template isn't sticky anymore. Is there anything I can do to make it sticky again or do I need to re-make it?
A: We have had success using rubbing alcohol or window cleaner with a lens cleaning cloth to clean the back of it to get the adhesive working again, but it will still likely not be as sticky as it once was.
Q: What are the cutting settings for a GCC Expert cutter?
A: Use a 65 degree blade, a force of 90-110 with 2 passes and a speed of 50.
Q: I see the free font in discription, I added it to cart but it isn't free???
A: The font is free, it is just itemized in your cart. There should be $0.00 next to it upon checkout! If this is not the case, please contact our customer support center at [email protected] or by calling (941) 755-1696.
Q: What pressure do you use for magic flock cutting?(Default or More)
A: That depends on which cutter you are using. We have recommended cut settings located under our FAQ for each cutter that we work with. However, please keep in mind that these are a guideline, and we always recommend you do a test cut before committing to a larger design.
Q: what setting should my cricut air explore 2 be on when cutting the flock
A: We recommend using Cardstock + or Heavy Cardstock!