Heat Press Pillow - 5.5" x 22"

Heat Press Pillow - 5.5" x 22"

Price: $19.95
SKU: HeatPress-Pillow-5.5x22
MPN: HeatPress-Pillow-5.5x22
Brand: The Rhinestone World
Availability: Available In Stock
Write a Review
Heat Press Pillows also known as heat transfer pillows or heat printing pillows are non-stick foam inserts used with Heat-Presses during the heat printing process.

  • Heat press pillows are recommended when pressing a garment with zippers, buttons, snaps, collars or thick seams. When used, raised elements of the garment sink down into the pillow, eliminating pressure points and creating a more even pressing surface.
  • Without the Heat Press Pillow, the heating element is unable to make a tight, smooth seal on the Heat-Transfer-Vinyl. They also eliminate any indentation that can appear from the heat press outside edges.
  • To use, place the pillow inside or underneath the garment, adjust your heat press using the knob atop the upper platen to accommodate the new thicker pressing surface and begin pressing.
  • Heat press pillows are reusable. This pillow is 5.5 inches by 22 inches and 6mm thick. It also is available in a 12-by-14-square size and a 5.5-by-5.5-square size.
  • Improve the final result of vinyl applications to backpacks, hats, hoodies, reversible mesh jerseys, baby onesies, and any garment with raised surfaces, using a Heat Press Pillow.
For tips, tricks, and craft ideas check out our library of TRW Tutorials and videos!

Reward Points

4 points will be rewarded to you when you buy this item.

Related Items

Protective Cover Sheet also known as Teflon sheets or non-stick sheets, act as a barrier between the heat element and the garment during the heat printing process. Protective Cover Sheets are commonly used with Heat Presses when transferring designs to ensure a smooth, semi-gloss finish on graphics. When layering Heat Transfer Vinyl or adding Hotfix Rhinestones Rhinestones to a design, place the cover sheet on top of your garment before using the heat press to protect the first layer. When printing the front and back of a shirt, place the protective sheet cover between the fabric to prevent the shirt from sticking together. Protective Cover Sheets are reusable. They will only need to be replaced if they become ripped, creased or wrinkled to the point of ineffectiveness. This protective sheet is 9.75 by 9.75 inches. If you need a smaller sheet check out the 18 inches by 20 cover sheet.
$6.95
Available In Stock
Cutting Mat 12 by 24 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 24 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This Cutting Mat 12 by 24 inches is compatible with the full size GCC Puma IV Cutter, GCC Expert II LX Cutter, GC Expert II Cutter, GCC Jaguar V Cutter and Graphtec CE7000 Cutter.
$15.99
Available In-Stock
Heat Press Pillows also known as heat transfer pillows or heat printing pillows are non-stick foam inserts used with Heat-Presses during the heat printing process. Heat press pillows are recommended when pressing a garment with zippers, buttons, snaps, collars or thick seams. When used, raised elements of the garment sink down into the pillow, eliminating pressure points and creating a more even pressing surface. Without the Heat Press Pillow, the heating element is unable to make a tight, smooth seal on the Heat-Transfer-Vinyl. They also eliminate any indentation that can appear from the heat press outside edges. To use, place the pillow inside or underneath the garment, adjust your heat press using the knob atop the upper platen to accommodate the new thicker pressing surface and begin pressing. Heat press pillows are reusable. This pillow is 12 inches by 14 inches and 6mm thick. It also is available in a 5.5-by-22-rectangle size and a 5.5-by-5.5-square size. Improve the final result of vinyl applications to backpacks, hats, hoodies, reversible mesh jerseys, baby onesies, and any garment with raised surfaces, using a Heat Press Pillow. Do I need a Heat Press Pillow or Protective-Cover-Sheet? If your garment has raised surfaces like zippers, buttons, or thick seams, you will need a Heat-Press-Pillow to ensure equal pressure when applying Heat-Transfer-Vinyl. If your garment does not have raised surfaces, but you will be creating a multilayered Heat-Transfer-Vinyl design or adding Hot-Fix-Rhinestones on top of vinyl, you will need a Protective-Cover-Sheet.
$19.95
Available In Stock

You May Also Like

The 6 Inch Vinyl Squeegee Ruler achieves a smooth, uniform vinyl application in addition to quick measurements while you work. Made of a firm, durable material this squeegee is ideal for pressing vinyl to transfer-tapes and applying decals to hard surfaces. This tool offers a secure, comfortable grip with just enough flexibility to apply the firm pressure needed to make decals as even as possible. The squeegee’s ultra-smooth, tapered edges keep your materials safe from scratches while cutting down on air bubbles between the surface and material. This 6 inch long squeegee features ruler measurements for both centimeters and inches.
$6.00
Available In Stock
Place and adjust single stones with ease using our Premium Craft Tweezers. Perfect for small fixes, these specialty tweezers feature a flat bottom and fine, tapered tip for perfect placement every time! Easily adjust or remove single flatback-rhinestones after placing them with a rhinestone pick-up tool. Hotfix-rhinestones are typically brushed into Magic Flock template material to achieve the desired design. If a stone does not fall into place the tweezers will allow you to easily hand-position the stone.
$6.99
Available In Stock
Just like magic! Weed even the most intricate vinyl designs perfectly every time with the. TRW Magic Weed Edge! The Magic Weed Edge has a sharp curved tip for easy and precise weeding at lightning speed. This is an essential weeding tool for anyone working with HTV, Craft, or Adhesive Vinyl. TRW Magic Weed Edge fits comfortable in your hand and the textured grip gives you maximum control while weeding. Stainless steel construction and a fine point allow you to easily grab even the tiniest pieces of vinyl material.
$9.99
Available In Stock