Ready for a blade replacement? This is a 45 degree replacement blade for the following cutters: GCC Jaguar V, Puma IV and Expert II cutters. The 2.5mm blade will fit into the standard blade housing for the GCC Jaguar V, Puma IV and Expert II. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. To fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder you will need the 2mm blade, this 2.5 mm blade will not fit in their standard blade housing.

Ready for a blade replacement? This is a 65 degree replacement blade for the following cutters: GCC Jaguar V, Puma IV and Expert II cutters. The 2.5mm blade will fit into the standard blade housing for the GCC Jaguar V, Puma IV and Expert II. If you are cutting thinner materials such as Siser-Easyweed or Colorspark-Holographic we suggest you use the 45 degree blade. If you are cutting thicker material like Magic-Flock or Glitter-vinyl, we suggest the 65 degree blade for the best cut. To fit into the standard blade housing of the Roland GS-24, Cricut Explore Air, Cricut Explore Air 2, older GCC models (Jaguar IV and Expert 24), and TRW's Blade Holder you will need the 2mm blade, this 2.5 mm blade will not fit in their standard blade housing.

Cutting Mat 12 by 12 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 12 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. If you need a lighter tack option, check out the Silhouette Cameo 12 inch Cutting Mat. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This mat is compatible with the full size Cricut and Silhouette Cameo Cutters.

Cutting Mat 12 by 24 inches is a lightly frosted, flexible clear plastic with a 1 inch grid and ruler. This mat offers a standard tackiness and a 12 by 24 inch cutting area. The purpose of a cutting mat is to hold your material firmly in place while it is being run through your cutting machine. The thinner the material being cut, the less tacky the mat should be to avoid tearing. A cutting mat is always needed to cut scrap material. When the vinyl is not its full, original width, the mat allows the vinyl to feed into the machine properly. This is NOT a self-healing mat intended to be used with x-acto knives or rotary cutters. It is intended for cutting Adhesive Vinyl or Heat Transfer Vinyl with a Vinyl Cutter. This Cutting Mat 12 by 24 inches is compatible with the full size GCC Puma IV Cutter, GCC Expert II LX Cutter, GC Expert II Cutter, GCC Jaguar V Cutter and Graphtec CE7000 Cutter.