Please note these are recommended cut settings, we strongly suggest always making a test cut to ensure these cut settings work for you and your cutter. Setting can vary based on blade life, equipment, and material.

Silhouette Cameo 3, Cameo 4, and Cameo 4 Pro:

• Blade Depth: 2
• Force: 10
• Speed: 8
• Passes: 1

If you have any additional questions please contact our Customer Service Team Monday-Friday 9am-4:30pm EST.

• Feed the vinyl into your machine shiny side up and adjust cut settings as needed. Cutting mats are recommended for Cameo and Cricut vinyl cutters.
• Once cutting is complete, remove the vinyl and cutting mat from your machine.
• Weed excess material as needed. For very intricate designs, we recommend reverse weeding!
• Place transfer tape on top of your weeded decal, ensuring that the tape is flat.
• Apply pressure with a squeegee to create a stronger grip and remove air bubbles. Before application, we recommend placing the tape and decal face-down on a flat surface.
• Use one hand to hold the tape down. Use your other hand to apply pressure and peel the carrier backwards, away from the decal and tape.
• Apply your decal to a flat, clean surface for best results. Use medium pressure and a vinyl squeegee to remove air bubbles.
• Carefully peel back your transfer tape and admire your new decal!

• ColorSpark Medium-Tack Blue Grid Application Tape should be used for most standard vinyl decal projects.
• ColorSpark High Tack Gray Grid Application Tape is used for specialty vinyl's such as ColorSpark Metallic-Adhesive-Vinyl, Holographic-Adhesive-Vinyl and Opal-Adhesive-Vinyl.
• ColorSpark Super-High-Tack Black Grid Application Tape is specially designed for use with ColorSpark-Glitter-Textured-Adhesive-Vinyl.