Make A Rhinestone and glitter wrap

This wrap template only fits a Cricut Maker

Material

Cricut Maker

Cricut Maker

Heat Press

Heat Press

Cricut wrap template

.SVG Wrap Template

hot-fix tape

Hot-fix Tape

magic Flock

Magic Flock

rose gold rhinestones

Rose Gold Rhinestones

siser rose gold vinyl

Rose Gold Siser Glitter

HTV anything

HTV Anything

Cover Sheets

monster brush

Monster Brush

Tutorial

step 1

Step 1

Use your Cricut Maker, and set the .SVG design file ready for cut. Load your Rose Gold Siser Glitter on the cutter and cut.

step 2

Step 2

Load magic flock into the cutter and cut.

step 3

Step 3

Stick the magic flock on the table and brush rhinestones on.

step 4

Step 4

Place hot-fix tape on top of the rhinestones, give it a firm press and lift up the hot-fix tape to transfer the rhinestones. 

step 5

Step 5

Weed out excess vinyl on your Siser Glitter and place it on the shiny side of the HTV anything.  

step 6

Step 6

Place cover sheets under and over the HTV anything and Siser Glitter.

step 7

Step 7

Set your heat press to 310°F  and press with light/medium pressure for 6-8 sec. 

step 8

Step 8

Remove the carrier sheet.

step 9

Step 9

Place the hot-fix tape with rhinestones on top of the Siser Glitter.

step 10

Step 10

Press with firm pressure at 320°F for 15 sec. 

step 11

Step 11

Remove Hot-fix tape. 
Not mention in the video: If you want to secure the rhinestones, place the rhinestones face down, add cover sheets over and under it, and press for 5 sec.

step 12

Step 12

Trim the rhinestone decal with scissors.

step 13

Step 13

Remove the backing on the finished decal, cut out a middle piece and reapply the backing.

step 14

Step 14

Place the decal on your Cricut Maker, adjust it to your liking.

step 15

Step 15

Remove the backing and press the decal on the Cricut Maker, and you are done.

cricut wrap