Creating Custom name tumbler
Using Flash reflective and color changing colorspark vinyl

Material

ColorSpark Reflective Adhesive Vinyl

ColorSpark Reflective Vinyl

ColorSpark Temperature Color-Changing Adhesive Vinyl

ColorSpark Temperature Color Changing Vinyl

parchment paper

Parchment Paper

application tape

Application Tape

Magic Weed Edge

Magic Weeding Edge

TRW Flutter Script Font

TRW Flutter Script Font

Squeegee

Squeegee

Tutorial

step 1

Step 1

Create your custom name in Cricut design space.

step 2

Step 2

Load vinyl and cut out all your designs.

step 3

Step 3

Use your magic weeding edge to weed out the excess vinyl from the designs.

step 4

Step 4

Place the application tape on your design, and run the squeegee a few times to transfer the designs.

step 5

Step 5

Remove the backing of the vinyl

Step 6

Step 6

Create a hinge at the right hand side by taping part of the application on the table. Then place parchment paper between the 2 designs to align the designs without sticking them on top of each other.

Step 7

Step 7

Once the design are lined up nicely, remove the parchment paper and use the squeegee to slide the top design on the bottom from right to left to avoid bubbles.

Step 8

Step 8

Peel out the backing from the decal and stick it on the tumbler.

Step 9

Step 9

Remove the application tape from the design and you are done. Leave product at least 48 hours to cure before contact with water.