24oz Branded Cold Cup - Wrap Template Mini Pack 2

This mini pack includes the template to cover the lid and has the center hole punched out where the straw would go. We do not have templates to decorate straws.

TRW Pilar (5/2/2021) · Accepted Answer

There are 3,124 Total ss10 rhinestones in this design.

The cup body has 2,498 ss10 rhinestones.
The cup lid top has 468 ss10 rhinestones.
The cup lid edge has 158 ss10 rhinestones.

Our rhinestones are sold by the 10 gross packs (1,440 rhinestones per pack). You will need 3 packs or 30 gross of hotfix rhinestones for this cup.

Alex (4/29/2021) · Accepted Answer

Yes the rhinestone template comes with the lid and rim template.

TRW Pilar (4/13/2021) · Accepted Answer

When this pack was first released, we did not design the template to reach the bottom of the cup. Many of the TRW Crew requested we redesign the file to reach the bottom rather than ending where that ledge cuts in on the bottom of the cup. We have done free updates to the design since the first release, so now the Tiger stripes blend in the back and the template now reaches the bottom of the cup.

The bottom of the cups do have a tiny ledge and we've found if you use your thumbs to press the wrap tightly to the cup, you will get the best seal. We have also used a tiny bead of Supertite Fusion Tack glue at the seam to ensure a tight seal where that lip or ledge is.

Alex (5/25/2021) · Accepted Answer

No, the acrylic cups have a different taper and are obviously larger. Just scaling the templates up would not match the curve and logo location.

TRW Pilar (3/17/2021) · Accepted Answer

No, this mini pack does not include a wrap without the circle for the rhinestone version. Depending on the software you use, you could either do a fill of the circle with ss10 rhinestones or copy/paste rhinestones to the circle. This is not something you'd be able to do easily in Design Space.

TRW Pilar (3/22/2021) · Accepted Answer

This mini pack was created before we came out with HTV Anything and only carried Bling Anything. Yes, this pack can definitely be used on HTV Anything. The only time you cannot use HTV Anything with hotfix materials is if pressing ONLY hotfix rhinestones. Hotfix rhinestone only designs require Bling Anything.

TRW Pilar (3/24/2021) · Accepted Answer

The longer edge of this file is over 11.5". Design Space only lets you cut up to 11.5" wide unless you are using the Extra Long mat and rotate your design. Input in Design Space that you're using the longer mat and rotate the design so the long edge goes along the 24" length of the mat.

Alex Gibson (3/26/2021) · Accepted Answer

You could edit it in silhouette studio to move the stones around and adjust the backing, but it will be a little tedious as the stones would need to be moved individually.

Alex (4/9/2021) · Accepted Answer

A: This product is a digital template download.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Alex (4/9/2021)

Alex (6/3/2021) · Accepted Answer

We do not have any plans to release the designs separately at this time but I have forwarded your request to management for future decision.

Alex (6/7/2021) · Accepted Answer

This pack is designed for only the plastic Starbucks cups, the acrylic and plastic cup templates are not interchangeable.

Alex (6/23/2021) · Accepted Answer

unfortunately we do not sell the rhinestone template by itself at this time.

Alex (7/13/2021) · Accepted Answer

This kit includes both rhinestone and vinyl templates, all with a hole in the middle for the logo.

Alex (7/27/2021) · Accepted Answer

There are a few possibilities for this depending on what software and cutter you are using, please reach out to our customer service department via the information below.

Phone: 941-755-1696
Email: [email protected]

Alex (8/5/2021) · Accepted Answer

No, these templates are only designed to work with the single wall 24oz reusable plastic tumblers.

Alex (8/13/2021) · Accepted Answer

A: Unfortunately we only sell these designs as a kit.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Alex (8/13/2021)

TRW-Crystal (2/18/2022) · Accepted Answer

A: Yes, they're included

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: TRW-Crystal (2/18/2022)

TRW-Crystal (3/3/2022) · Accepted Answer

The actual finished products are ok for resale, yes. Our designs etc are not for resale. Thank you!

24oz Branded Cold Cup - Wrap Template Mini Pack 2

TRW-Crystal (11/2/2022) · Accepted Answer

We can offer finished products, here's the link to the Estimate Page: https://www.therhinestoneworld.com/estimate-for-custom-product

TRW Pilar (3/27/2023) · Accepted Answer

No, the templates for the COLD cup fit the shorter, somewhat flexible cups from Starbucks.
The 24oz Acrylic templates are very very close to fitting the 24 oz Classic tumblers from Save a Cup. We have included a bonus file for the single color full rhinestone wraps in the 24oz Acrylic Cup Wrap Pack - Rhinestone and Vinyl Templates: https://www.therhinestoneworld.com/24oz-acrylic-cup-template-mini-pack-3
Or you can purchase the template for just the single color wrap here: https://www.therhinestoneworld.com/save-a-cup-24oz-tumbler-rhinestone-design

TRW Pilar (8/23/2023) · Accepted Answer

No, this mini pack does not include a wrap without the circle for the rhinestone version. Depending on the software you use, you could either do a fill of the circle with ss10 rhinestones or copy/paste rhinestones to the circle.

TRW Pilar (6/25/2024) · Accepted Answer

I'm sorry, we do not have an individual listing for any of the tumbler designs in this minipack.

We do have individual rhinestone tumbler designs using other tumblers, though. Those listings can be found by going to Designs > Tumbler Cup Wrap Templates > Rhinestone Designs.

You can browse the various tumblers we've created templates for here: https://www.therhinestoneworld.com/Tumblers-that-fit-TRW-Templates_b_288.html

24oz Branded Cold Cup - Wrap Template Mini Pack 2

Wrap Template for Starbucks Cold Cup 24 ounce

Instructions For Making a Rhinestone Tumbler

Rating Snapshot

Average Customer Ratings

Q: What size rhinestone is the rhinestone wrap in this pack please

Q: Is this package useful to make the straw and the lid?

Q: About how many ss10 rhinestones are required for this design?

Q: hi the rhinestone template comes with the lid and rim template to download?

Q: Do these designs fit acrylic cups if I just adjust the size?

Q: Does this wrap come with the non circle?

Q: Are we able to use HTV anything with this design? I noticed on the description it states Bling anything.

Q: We are having trouble with the measurements in design space utilize the craft cut file. The domination provided are two large foe design space. It wont load to cut. What can we possibly be doing wrong??????

Q: Is there any way to customize the rhinestone wrap to include a name or different pattern? I use Silhouette Studio for design.

Q: is this a sticky flock template or ready made wrap

Q: Hi. Would you consider just having the tiger wrap available as a single purchase? Pleeeease. The bundle is nice however some of us don't have the need for them.

Q: I own the 24oz Acrylic Cup Template Mini Pack 3, do I need this one to make The Starbucks plastic one too?

Q: Where can I find the rhinestone svg sold separately?

Q: is there only a template with a hole in the center in this set? not a full rhinestone one?

Q: My cut template is larger then the cup, how can I fix this

Q: Does the mini pack for 24oz mugs work for the Starbucks 24 oz insulated mugs

Q: Is there an option to buy just one of the templates?

Q: Is there a top/lid and side of lid cover for this design?

Q: Hello. I saw a phrase in this article saying that it can be used for business purposes. I want to print this product and sell a Starbucks decorating DIY set in Korea. Is there any problem with selling like that?

Q: Do you sell these rhinestone templates for Starbucks cup Ready to go

Q: Will these templates work on the Maars 24oz acrylic cups from Save a Cup?

Q: Hi. is there also a design in this format without cutout for the logo? Thanks Nicole

Q: Can i just get the svg file for the bling tumbler?

Click to View Instructions for making a Full Rhinestone Tumbler with Glitter HTV

Resizing a Rhinestone Design:

Template Hole Size need when using:

Related Items

You May Also Like